WA AGR 805-6475 2004-2025 free printable template

PESTICIDE APPLICATION RECORD (Knot weed) Washington State Department of Agriculture Plant Protection Division PO Box 42560 Olympia, WA 98504-2560 (360) 902-1853 NOTE: This form must be completed same

How to fill out WA AGR 805-6475

How to fill out WA AGR 805-6475

1. Obtain the WA AGR 805-6475 form from the official Washington State Department of Agriculture website or relevant office.
2. Begin by filling out your personal information at the top of the form, including your name, address, and contact details.
3. Indicate the type of application you are submitting by checking the appropriate box.
4. Provide any required identification numbers, such as your Social Security Number or Tax Identification Number, if applicable.
5. Complete the sections relevant to your specific application, ensuring all required fields are filled in accurately.
6. If applicable, attach any supporting documents that are requested within the instructions of the form.
7. Review the form carefully to check for any errors or omissions.
8. Sign and date the form at the designated spot.
9. Submit the completed form via the method specified in the instructions (mail, online submission, etc.).

Who needs WA AGR 805-6475?

1. Individuals or businesses seeking permits or licenses from the Washington State Department of Agriculture.
2. Farmers applying for agricultural programs or assistance.
3. Entities that need to report information or seek regulatory compliance in agriculture-related activities.

People Also Ask about

Where must New Jersey records required to be kept by a pesticide applicator business?

1. When staffed, during normal business hours, each pesticide applicator business shall have someone authorized and available to provide the records required to be kept above immediately upon request by the Department and medical personnel in emergency situations.

How long do you have to keep spray records?

Local Environmental Risk Assessment for Pesticides (LERAPs). It is a requirement to keep records for three years of LERAPs undertaken or where no LERAP is undertaken records must show that the buffer zone specified on the label was observed.

How long after pesticide application is it safe?

At a minimum, you and your family should wait at least 30 minutes before going outside and walking around the area that was sprayed. Keep your pets indoors during this period as well. Waiting at least 30 minutes reduces your chances of breathing in pesticides or getting them on your skin, clothes, etc.

What do you need to have in order to apply restricted use pesticides in Florida?

All individuals who apply restricted use pesticides in Florida or who apply any pesticide in Florida by aerial delivery must have a Florida license issued by FDACS. 358 kB ] .

When a pesticide has been applied on a farm the records have to be kept for?

In ance with the 1990 Farm Bill, all private applicators are required by law to keep record(s) of their federally restricted use pesticide (RUP) applications for a period of 2 years.

Why is important to keep records of the amount of waste sprayed on crops and fields?

It is important to keep thorough and accurate records of pesticides and their use for a number of reasons: Traceability for assurance and compliance. Proof that pesticides have been used and/or stored in the correct and legal way.

For pdfFiller’s FAQs

What is wsda pesticide application record?

WSDA pesticide application record refers to the documentation maintained by the Washington State Department of Agriculture (WSDA) to track the use of pesticides in the state. This record includes information such as the type of pesticide used, date of application, location where it was applied, application method, quantity used, and the name of the certified pesticide applicator who performed the application. The purpose of maintaining these records is to ensure the safe and responsible use of pesticides, track their environmental impact, and support regulatory compliance.

Who is required to file wsda pesticide application record?

The Washington State Department of Agriculture (WSDA) requires commercial pesticide applicators, dealers, and public agencies to maintain and submit pesticide application records.

How to fill out wsda pesticide application record?

Filling out the WSDA Pesticide Application Record form requires attention to detail and accurate information. The following steps can guide you through the process: 1. Start by reading the instructions provided on the form. This will help you understand the specific requirements for filling out the record. 2. Begin the form by providing the necessary information at the top, such as the application date, applicator's name, and the name of the company or organization. 3. Provide details about the site being treated, including the address, the type of crop or area, and the total acreage or size. 4. In the "Product Applied" section, list each pesticide used. Include the name of the product, the active ingredient(s), the EPA registration number, and the rate or amount applied. You may need to consult the product label or your records to gather this information. 5. Indicate the target pests or weeds being treated for each product applied. Be specific and accurate in describing the pests or weeds being controlled. 6. In the "Application Information" section, note the method of application used, such as spraying, baiting, or injecting. Specify any equipment or tools used during application, including sprayers, spreaders, or applicator types. 7. Record the total amount of pesticide applied for each product listed. This can be provided in ounces, pounds, gallons, or other applicable measurements. Ensure the units are consistent throughout the form. 8. Specify the application area and provide information on the equipment calibration, application pressure, wind speed, and any non-target areas adjacent to the site. 9. If there were any complications, such as equipment malfunction, unusual weather conditions, or deviations from the label instructions, make sure to document them in the appropriate section. 10. Finally, sign and date the form to certify the accuracy of the information provided. Remember that accuracy and comprehensive record-keeping are crucial when filling out pesticide application records. It is also advisable to keep a copy of the completed form for your own records.

What is the purpose of wsda pesticide application record?

The purpose of a WSDA (Washington State Department of Agriculture) pesticide application record is to document the use of pesticides on agricultural lands and ensure compliance with state and federal regulations. This record serves as an important tool for tracking pesticide use, monitoring potential environmental and public health impacts, and providing transparency to concerned stakeholders. It helps regulatory agencies evaluate the safety and effectiveness of pesticide applications, enforce pesticide laws, and mitigate potential risks associated with pesticide use. The record includes information about the applicator, location and date of application, specific pesticides used, application rates, and other relevant details, providing a comprehensive record of pesticide use for future reference and analysis.

What information must be reported on wsda pesticide application record?

The Washington State Department of Agriculture (WSDA) requires specific information to be reported on a pesticide application record. Here are the key details that must be included: 1. Applicator Information: - Name, license number, and contact information of the person responsible for applying the pesticide. - Applicator's employer's name and contact information if applicable. 2. Location Information: - Name and address of the site where the pesticide was applied. - Size or acreage of the treated area. - Directions, landmarks, or GPS coordinates to accurately locate the site. 3. Pesticide Information: - Trade or brand name of the applied pesticide. - EPA registration number. - Active ingredient(s) and concentration. - The total amount of pesticide used (broad measurement like grams, liters, ounces, or specific dilution rates). 4. Application Details: - Date and time of the pesticide application. - Specific target pest(s) for control or crop/area being treated. - Equipment used for application, including type (sprayer, spreader, etc.) and settings. - Application method (spraying, dusting, granules, etc.). - Weather conditions during application, including temperature, wind speed, and direction. - Any special instructions or precautions taken during the application process. 5. Worker Protection: - Details of any worker protection measures implemented during the application. - Information about notifying workers, restricted entry intervals (REIs), and other safety precautions. 6. Pest Management Plan: - This section should outline the overall pest management strategy employed, indicating how the application fits into the plan. It's important to note that specific record-keeping requirements may vary by state and type of pesticide application. Therefore, it is advisable to refer to the local regulatory guidelines and consult with the appropriate authority, like the WSDA, for accurate and up-to-date information.

How can I send WA AGR 805-6475 to be eSigned by others?

When your WA AGR 805-6475 is finished, send it to recipients securely and gather eSignatures with pdfFiller. You may email, text, fax, mail, or notarize a PDF straight from your account. Create an account today to test it.

Where do I find WA AGR 805-6475?

The pdfFiller premium subscription gives you access to a large library of fillable forms (over 25 million fillable templates) that you can download, fill out, print, and sign. In the library, you'll have no problem discovering state-specific WA AGR 805-6475 and other forms. Find the template you want and tweak it with powerful editing tools.

Can I create an eSignature for the WA AGR 805-6475 in Gmail?

With pdfFiller's add-on, you may upload, type, or draw a signature in Gmail. You can eSign your WA AGR 805-6475 and other papers directly in your mailbox with pdfFiller. To preserve signed papers and your personal signatures, create an account.

What is WA AGR 805-6475?

WA AGR 805-6475 is a form used by agricultural producers in Washington State to report their annual gross revenue.

Who is required to file WA AGR 805-6475?

Agricultural producers in Washington State who meet the revenue thresholds specified by the Washington State Department of Revenue are required to file WA AGR 805-6475.

How to fill out WA AGR 805-6475?

To fill out WA AGR 805-6475, gather the necessary documentation of your gross revenue, complete the required sections of the form by entering your information and total revenue, and submit it to the appropriate state authority.

What is the purpose of WA AGR 805-6475?

The purpose of WA AGR 805-6475 is to assist the Washington State Department of Revenue in assessing and collecting taxes from agricultural producers based on their gross revenue.

What information must be reported on WA AGR 805-6475?

The information that must be reported on WA AGR 805-6475 includes the producer's name, business information, total gross revenue for the reporting period, and any relevant deductions or exemptions.